[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
SV: Rep. pitch control
Elias,
When the manual says +12/-12, you should regard the numbers in reference to
an index value of 64 (=no pitching).
Please check that you have programmed the FCB to send only the midi command
you want; it is possible to have it sending out ten simultaneous midi
commands on each foot press. The manual is not easy to understand and if
you
(like I was) are reading the Swedish transcription, bear in mind that it is
simply not accurate on some parts.
Cool idea to play "kinki feet" on the 'peater ;-)
Best wishes
Per Boysen
________________
http://loopboy.tk
www.boysen.se
www.upsweden.com
www.fuzz.se
> -----Ursprungligt meddelande-----
> Från: Elias Faingersh [mailto:elias@mbox306.swipnet.se]
> Skickat: den 1 april 2002 15:30
> Till: Loopers-Delight@loopers-delight.com
> Ämne: Rep. pitch control
>
>
> I use the new Beringer FCB to control repeater.
> Partly couse I have this kinki idea of playing polyphonic lines
> with my feet.
> Anyways what happends is that when I program the FCB the way
> REP. manual says
> for ex. prm# 28, value 60 what should make -1(or -13) it does
> lower the pich to major 6.
> Besides I only managet to program six differnt pich shift the
> rest just get the pich one octave upp or down
> when it should get it to -3, 5 or what ever.
> What I'm missing?
> and how to read the rep. manual when it says 12? does it conut
> semitones, steps or some else?
>
> Elias Faingersh
>
>
>