RE: Rack Dreams

["M. Steven Ginn" <sginn@airmail.net>]

I actually put the Mo-FX on the backside of my rack. Because it's so
shallow, it seemed to work well in that spot.

M. Steven Ginn

********************************
Please go to
<www.SeptemberRising.org>
Listen to the music.
Purchase the CD
Support the NY Firefighters
9/11 Relief Fund
********************************



> -----Original Message-----
> From: Mark Sottilaro [mailto:sine@zerocrossing.net] 
> Sent: Tuesday, July 16, 2002 2:03 PM
> To: Loopers-Delight@loopers-delight.com
> Subject: Re: Rack Dreams
> 
> 
> While we're at it, how many Repeater users HATE the fact that 
> the chassis is angled!  Because it's angled and shallow, 
> there's NO good place to put it in a rack, unless it's in a 
> rack with all other Electrix gear.  VERY bad design, IMO.  
> Makes plugging things into it really hard.
> 
> Mark Sottilaro
> 
> "Stephen P. Goodman" wrote:
> 
> > How about a single rack space in a block that is off to the 
> side and 
> > vertical, so to provide easy plug access to all devices in the rack 
> > assembly? Stephen P. Goodman
> > EarthLight Productions
> > *
> > http://www.earthlight.net/Studios - The Free Loop of the Week!
> > http://www.earthlight.net/Gallery_Front.html - Cartoons!
> > http://www.earthlight.net/HiddenTrack.html - More Cartoons!
> >
> > ----- Original Message -----
> > From: "John Tidwell" <wedgehed@yahoo.com>
> > To: "Loopers Delight" <Loopers-Delight@loopers-delight.com>
> > Sent: Tuesday, July 16, 2002 08:29 AM
> > Subject: Rack Dreams
> >
> > > I wish....
> > >
> > > Rack makers would use the dead space at top & bottom
> > > to provide patch points. I've been tempted to dis-
> > > assemble one of my patch bays, break out my drill
> > > set, & see what happens.
> > >
> > > For that matter, someone ought to make a 1/2 rack
> > > space HIGH patch bay. My 12 space rack has an odd
> > > space left over due to a home made sliding shelf.
> > > It could be handy to have patch points at different
> > > levels off the rack also. I've been tempted to
> > > disassemble one of my patch bays, break out the
> > > band saw, & see what happens.
> > >
> > > I wish equipment makers would design their products
> > > so you could run cable from the midi & cv connections
> > > on the back panel to a corresponding plug on the
> > > rack ear.
> > >
> > > I wish someone made a single space rack mixer with
> > > 16 channels & 8 fx sends. I'm reasonable - I wouldn't
> > > even demand EQ. :)
> > >
> > > John
> > >
> > > =====
> > > John Tidwell
> > >
> > >
> > >
> > >
> > > __________________________________________________
> > > Do You Yahoo!?
> > > Yahoo! Autos - Get free new car price quotes 
http://autos.yahoo.com
> >
> >
> >
> >