[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: FCB1010
Hi Andy,
I too am attempting to program the 1010 with CC's and you are right the
long press is not there. I am going to try using notes next. I had
trouble
programming the pedals for volume and feedback. I didn't find the CC # in
the book but I am sure I overlooked it somewhere as I haven't read the
manual cover to cover sequentially. Can you steer me in the right
direction.
I started using the 1010 with the Repeater and it is great for that but
if
I can eliminate one more pedal from the overcrowded floor I may be able to
dance while I play without breaking something.
Thanks,
Weg
From: SoundFNR@aol.com
Reply-To: Loopers-Delight@loopers-delight.com
To: Loopers-Delight@loopers-delight.com
Subject: Re: FCB1010
Date: Mon, 22 Jul 2002 05:55:02 EDT
MIME-Version: 1.0
Received: from mc1-f41.law16.hotmail.com ([65.54.236.48]) by
mc1-s17.law16.hotmail.com with Microsoft SMTPSVC(5.0.2195.4905); Mon, 22
Jul
2002 03:02:15 -0700
Received: from hemlock.violacea.com ([207.228.238.9]) by
mc1-f41.law16.hotmail.com with Microsoft SMTPSVC(5.0.2195.4905); Mon, 22
Jul
2002 02:56:06 -0700
Received: (from looper@localhost)by hemlock.violacea.com (8.9.3/8.9.3) id
FAA15200;Mon, 22 Jul 2002 05:55:32 -0400
Resent-Date: Mon, 22 Jul 2002 05:55:32 -0400
Old-Return-Path: <SoundFNR@aol.com>
Message-ID: <161.1109cd26.2a6d3076@aol.com>
X-Mailer: AOL 5.0 for Windows sub 107
Resent-Message-ID: <lCzwKD.A.btD.Ua9O9@hemlock.violacea.com>
Resent-From: Loopers-Delight@loopers-delight.com
X-Mailing-List: <Loopers-Delight@loopers-delight.com> archive/latest/22199
X-Loop: Loopers-Delight@loopers-delight.com
Precedence: list
Resent-Sender: Loopers-Delight-request@loopers-delight.com
Return-Path: Loopers-Delight-request@loopers-delight.com
X-OriginalArrivalTime: 22 Jul 2002 09:56:07.0166 (UTC)
FILETIME=[FFBA69E0:01C23165]
> >channel = *1
> >
> >control source + not
>
> try using cont instead of not
Terry
Er, no don't do that!
The FCB1010 only works well with the EDP if you use Note-On.
(you can't do LongPress)
Here's a mail I sent to someone with the same problem,
tells you how to program for Record, which is a good place to
start.
make sure your MIDI cable is working, and that your using
MIDI Out from the Behringer to MIDI in ont the EDP.
(obvious, but so easy to get wrong)
andy butler
***************************************
Here's how
Get the gear set up and connected, and have
your Behringer and EDP manuals to hand.
1) first make sure the EDP is set up right:-
ControlSource = not
Source# = 36
check which MIDI channel it uses
2) Go to page 10 in your Behringer manual.
In the Global setup make sure that functio 10/0,
which sends note on/off is set to the same MIDI channel as your EDP.
(at this point you might also like to set functions 8 & 9, to the EDP
MIDI channel. These are the expression pedals, and if you like these can
control output vol. and feedback on the EDP)
3)Then go to the bottom of page 13 (section 2.4.4) and program the
note numbers for the EDP functions you wish to access.
see page 4-71 in the EDP manual, under "Source#."
Record is 38
Well give it a go, you can always ask again if it
doesn't work.
...and remember, if you upgrade your EDP to the new Loop4
software there's even more opportunity for MIDI control.
good luck and happy looping
andy butler
Weg
_________________________________________________________________
Join the world’s largest e-mail service with MSN Hotmail.
http://www.hotmail.com
- Follow-Ups:
- Re: FCB1010
- From: "Jimmy Fowler" <jimfowler@prodigy.net>