Re: Using the Behringer FCB1010 midi controller w/ echoplex

[Mark Sottilaro <sine@zerocrossing.net>]

Hey, I don't know why, but I quickly figured out that when I went for a 
record function of note number 38, it was controlling parameters, which 
is 36!  I set it to 40 instead, and there it was, recording like it's 
supposed to.  Why 2 more?  I have no idea.

Mark Sottilaro

On Sunday, July 21, 2002, at 05:48  PM, stations@cinci.rr.com wrote:

> Thanks.
>
> Actually I had already added the 36 into the equation.
>
> I had control source set to not, I just tried setting it to cont 
> instead but
> it still didn't work.
>
> I did have the behringer set to note.
>
> There must be something simple I am missing.
>
>
> Footswitch #2 = overdub          original note 2 + 36 = 38
>
> Footswitch #3 = reverse          original note 3 + 36 = 39
>
> Footswitch #4 = 1/2 speed        original note 13 + 36 = 49
>
> Footswitch #5 = substitute       original note 12+ 36 = 48
>
> Footswitch #6 = multiply         original note 4 + 36= 40
>
> Footswitch #7 = insert           original note 5 + 36= 41
>
> Footswitch #8 = mute             original note 6 + 36= 42
>
> Footswitch #9 = undo             original note 7 + 36= 43
>
> Footswitch #10 = next loop       original note 8 + 36= 44
>
>
>
>> try using cont instead of not
>
>> check page 11 of the fcb manual and make sure "note"
>> is selected.  i think using control changes might be a
>> touch easier.  that's what i use with my all access
>> and it's a breeze to configure.
>>
>> -jim
>
>