[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: edp +

At 12:28 AM 7/29/2002, Mark Sottilaro wrote:

>On Sunday, July 28, 2002, at 10:00  PM, Bret wrote:
>>Specifically what aspect of the fidelity of the EDP is inferior to the
>>repeater, for example signal to noise, frequency response, harmonic
>>distortion, intermodulation distorion, hum, etc?
>
>seems to be a frequency response issue.  The high frequencies are 
>truncated.

according to an audio precision meter, the -3db point should be about 
19kHz 
if the gains are set correctly. That's pretty hard to hear. However, if 
you 
set the gain up wrong it could become worse. If the input is too high and 
you are engaging the limiter, it could interact with some other noise 
reduction filtering in the digital path to make a low-pass filter. Try 
adjusting the input gain and see if it makes a difference.
kim


______________________________________________________________________
Kim Flint                     | Looper's Delight
kflint@loopers-delight.com    | http://www.loopers-delight.com