[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: OT: Eventide H3500 question
Thanks for all the tips guys. I picked up a Y cable, but it didn't
have much effect on getting a stronger signal to the box. I'm going to
try and reconfiguring the jumpers next..
On Tuesday, July 30, 2002, at 04:36 PM, Richard Zvonar wrote:
> At 12:48 AM +0200 7/31/02, Italo De Angelis wrote:
>> Also you should have a Y cord feeding both inputs, since algorithms can
>> be very difeerent input-wise.
>
> This is a VERY important point! I normally feed both inputs of my
> H3000, using a Y cord as Italo suggests. Many algorithms use the Left
> input only
>
> 100 Diatonic Shift Left only
> 101 Layered Shift Left only
> 102 Dual Shift Left & Right independent
> 103 Stereo Shift Left & Right stereo
> 104 Reverse Shift Left only
> 105 Swept Combs Left only or Left & Right stereo
>(selectable)
> 106 Swept Reverb Left & Right stereo
> 107 Reverb Factory Left only
> 108 Ultra Tap Left only or Left + Right summed (selectable)
> 109 Long Digiplex Left only
> 110 Dual Digiplex Left only or Left & Right independent (selectable)
> 111 Patch Factory Left only
> 112 Stutter Left + Right summed
> 113 Time Squeeze Left & Right stereo
> 114 Dense Room Left only
> 115 Vocoder Left for Carrier & Right for Program signal
> 116 Multi-Shift Left & Right independent
> 117 Band Delay Left + Right summed
> 118 String Modeller Left only
> 119 Phaser Left only
> 120 Studio Sampler Left only or Left & Right stereo
> 121 Studio Sampler Left only or Left & Right stereo
> 122 mod factory|one Left & Right independent
> 123 mod factory|two Left & Right independent
>
>
> --
> ______________________________________________________________
> Richard Zvonar, PhD
> (818) 788-2202
> http://www.zvonar.com
> http://RZCybernetics.com
> http://www.cybmotion.com/aliaszone
> http://www.live365.com/cgi-bin/directory.cgi?autostart=rz
>
>
---------------------------------------------
Greg Kucharo
www.mutantaudio.com