Re: EDP MIDI parameter change question

[Kim Flint <kflint@loopers-delight.com>]

that's pretty strange. Do you have the ControlSource parameter set to 
Notes 
or Controllers? If it is "off" then program change messages are not 
received either.

otherwise I don't know why it wouldn't work. can you connect your 
controller to something like MidiOx and email me a text file of the midi 
program change commands it is sending?

kim


At 04:13 AM 7/31/2002, Steve Sandberg wrote:
>hmm, well I guess you probably are also sending the program change 
>commands
>on the same midi channel the echoplex is set to, and the midi out of your
>controller is connected to the midi in of the edp. never hurts to check 
>though.
>Yes to both --
>
>are you sure your midi controller is really sending program change 
>messages
>and not something else? (does it work controlling other devices?)
>Yes, it works controlling other devices.
>
>if you have presets saved, when you send program change 1 you see "P 1" on
>the display, program change 2 is "P 2" etc. Does that happen?
>This happens when I change parameter sets from the front panel, but 
>nothing happens when I try to do it through MIDI.




______________________________________________________________________
Kim Flint                     | Looper's Delight
kflint@loopers-delight.com    | http://www.loopers-delight.com