[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: input/output within old oberheim vs. new
i did this myself, but i have some experience with soldering...
if you do it, i highly recommend replacing the voltage
regulator as per kim's instructions (on the web site i think)
----- Original Message -----
From: "Jimmy Fowler" <jimfowler@prodigy.net>
To: <Loopers-Delight@loopers-delight.com>
Sent: Friday, August 02, 2002 11:13 AM
Subject: Re: input/output within old oberheim vs. new
> "Don't know the serial number, but the way to tell is to look at the
> resistors."
>
> what am i looking for?
>
> "They don't have to be replaced, unless you are not getting the input
> control you want."
>
> i'm not getting the input control i want, but i don't get a lot of the
> things i want.
>
> "You can just turn down the input, same effect (or is it an instrument?).
> So long as the output is hot enough for you."
>
> enter problem.
>
> anybody replaced the resistors personally or has everybody just sent it
>off
> to gibson?
>
> -jim
>
>