[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: EDP and a BIG burst of static/hiss
Yes, that is a good point. good ESD practice should always be followed
when
dealing with any electronics parts. The installation instructions that
come
with LoopIV explain this, hopefully everybody pays attention to it.
kim
At 10:34 AM 9/9/2002, Greg House wrote:
>Kim wrote:
> > Try reinstalling
> > the roms, maybe a pin got bent when you put the new roms in. Also
> > make sure
> > you put the chassis back together right and nothing fell loose inside
> > or anything like that.
>
>Just a minor point, but many electronic components are very sensitive
>to static damage. I don't know how sensitive these particular things
>are, but it would be a good precaution to make sure you're grounded to
>the chassis of the unit (and preferably to a good ground) to prevent
>damage from static discharge.
______________________________________________________________________
Kim Flint | Looper's Delight
kflint@loopers-delight.com | http://www.loopers-delight.com