[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: EDP and a BIG burst of static/hiss
At 03:09 PM 9/9/2002, sine@zerocrossing.net wrote:
>First, I want to thank you all for your excellent role as "Gibson customer
>support" and for all the good information. Tonight I shall (once again)
>open up my EDP and this time attempt to clean all the contacts. I only
>reseated the eproms, and upon finding the bent pin, I figured that was
>obviously my problem. When it worked after that, I thought I was done. I
>didn't even bother with the memory becaues the fault seemed so obvious.
You might also want to recheck the rom pins too. On occasion I've bent a
rom pin back, but didn't do it very well and left a kink in it. Then when
I
pressed it into the socket I just bent it out all over again. It's worth
it
to take some care and make sure the are all really in there.
kim
______________________________________________________________________
Kim Flint | Looper's Delight
kflint@loopers-delight.com | http://www.loopers-delight.com