[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: Andre EDP Loops
Neat idea. What about doing tempo along with pitch - faster tempo
combined
with higher pitch and slower tempo combined with lower pitch? Throw in a
way to switch directions (forward, reverse) and it seems like that would
be
an even closer approximation of scratching.
For example - you choose a midpoint of your control range. The first
value
to either side of the midpoint changes direction of playback (mid + 1 ==
forward and mid - 1 == reverse). Then as the control values get further
away from the mid you increase/decrease pitch and tempo.
The difficulty would be establishing that mid point (and limiting the
change of direction to only two single control values) via a typical
controller. Seems possible with a computer or maybe an outboard midi
filter.
How configurable is the DBeam?
At 11:10 AM 2002/09/14, Goddess wrote:
> I'm simulating a sort of scratch using the DBeam on the MC-505 to send
>note messages to pitchshift tracks in the Repeater. When done quickly,
>it
>sounds like scratching. Woohoo! -lots of fun! -and can be very
>musical too...