[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
RE: Lake Butler RFC-1 Battery Woes--No Direct Loop Content
On Tue, 1 Oct 2002 13:23:39 -0300 Matthias Grob <matthias@grob.org> wrote:
> seems to me that only the voltage is of
> importance, 1, 2, 3,, cells,
> in other words. A smaller one simply holds the
> data less time (weeks
> you leave the unit unconnected)
>
> For the polarity simply get the volt meter out
> and measure when its
> on, because it will be charging with the right
> polarity.
>
> >Hi,
> >
> >hey I got one of the rfc-1' and do you have
> the specs of the batery
> >that your ordered and a part # that would be
> very helpful to me as
> >well as I have had the orginal battery in it
> since I got it , geez,
> >10 years ago or so
> >
> >Thanks
> >Denis
> >
> >Denis taaffe
> >denis@dtguitar.com
> >http:/www.dtguitar.com
> >
> >-----Original Message-----
> >From: relayonemanband@earthlink.net
> >[mailto:relayonemanband@earthlink.net]
> >Sent: Monday, September 30, 2002 5:14 PM
> >To: Loopers-Delight@loopers-delight.com
> >Subject: Lake Butler RFC-1 Battery Woes--No
> Direct Loop Content
> >
> >
> >Hi all-
> >I attempted to change the battery in my RFC-1,
> the full featured MIDI foot
> >controller I used before I acquired the
> PMC-10. On the advice of Dr.
> >Richard, I ordered a battery from Parts
> Express that matched the specs.
> >However, when it arrived, I found that it did
> not match the dimensions of
> >the old battery.
> >Worse, there is no indication of polarity on
> the old battery or on the
> >circuit board (thanks, Emmett). My question:
> Help!!!
> >OK, let's phrase it in the form of a question.
> Anybody feel like taking
> >their RFC-1 apart to see which end is which?
> The specs of the new battery
> >are the same, so I might try using it (running
> leads from it to the circuit
> >board) but I don't want to blow this thing up.
> >Clueless in San Diego,
> >Gary
>
>
> --
>
>
> ---> http://Matthias.Grob.org
>
>
Cry for help.doc