[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
RE: Midi question/ FCB1010 wishes
Just another option. I use an older and cheaper (30 bucks or so used)
MOTU Midi Express- 2in/4out in the following way-
Master midi clock in on A- with A out #1 to another device, and #2 to IN
B- which then creates 2 more outputs of the master clock on B-
One thing is it requires a wall wart.
Having just looked at the previously mentioned 3x8 I see it is a far
more capable and flexible solution. I want one. :)
As for the FCB-1010 it would be great if the midi channels for each
expression pedal could be customized for each and every patch. In this
way any time you used a function for a certain device the expression
pedals could be set for that device as well- I hit an EDP function and
the pedals control Vol and Fdbk- I hit a Repeater control and now maybe
they control pitch and slip- all from the same bank!
Cliff
www.om-studios.com
-----Original Message-----
From: Andrew Hearst [mailto:hearst@echonyc.com]
Sent: Monday, October 07, 2002 10:43 PM
To: Loopers-Delight@loopers-delight.com
Subject: Re: Midi question
Stuart,
The heart of my looping rig (Repeater and FCB1010) is similar to
yours, and I also need to control an Electribe ES-1 (which needs to
send clock to everything) and a few other boxes. As far as I can
tell, the best inexpensive solution is the Midiman/M-Audio 3x8:
http://www.harmony-central.com/Newp/1998/Thru-3x8.html. It's only 80
bucks or so. I haven't bought it yet, but I probably will soon.
Best,
Andrew Hearst