[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
SV: FCB1010 question
> -----Ursprungligt meddelande-----
> Från: SRice [mailto:srice44@yahoo.com]
>
> The 1010 is seriously limited to using only one midi
> channel, period. For all the banks. Unless you can
> configure one of your devices to remap midi commands,
> it is almost certain that a command sent to one device
> will do something unwanted to another device.
But you can configure a certain pad to send on another midi channel. I'm
using this trick to set up a couple of banks for controlling the
Repeater on midi channel 8 (note numbers by "virtual" pad number 10) and
some other banks to control the EDP on midi channel 2. One expression
pedal is set to ch 2 (EDP) and the other to ch 8 (Repeater).
Best wishes
Per Boysen
________________
www.boysen.se
www.fuzz.se
www.upsweden.com