[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
re: FCB1010 question
First, I do not claim to be a midi expert, but I spent
a lot of time mucking with the fcb1010. If it can address
multiple midi channels as Per says, great, I can really
use it.
Per, please describe how you do this.
In my experimenting, I have not been able to have more
than one midi channel for all banks and all presets.
To clarify, _which_ midi channel is selectable, but my
experience is that it applies to everything.
Yours in rhythm,
Steve
Date:Wed, 16 Oct 2002 01:23:47 +0200
From:"Per Boysen" <per@boysen.se>
To:Loopers-Delight@loopers-delight.com
Subject:SV: FCB1010 question
> -----Ursprungligt meddelande-----
> Från: SRice [mailto:srice44@yahoo.com]
>
> The 1010 is seriously limited to using only one midi
> channel, period. For all the banks. Unless you can
> configure one of your devices to remap midi commands,
> it is almost certain that a command sent to one device
> will do something unwanted to another device.
But you can configure a certain pad to send on another midi
channel. I'm
using this trick to set up a couple of banks for controlling
the Repeater on midi channel 8 (note numbers by "virtual" pad
number 10) and some other banks to control the EDP on midi
channel 2. One
expression pedal is set to ch 2 (EDP) and the other to ch 8
(Repeater).
Best wishes
Per Boysen
__________________________________________________
Do you Yahoo!?
Faith Hill - Exclusive Performances, Videos & More
http://faith.yahoo.com