[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: digitech rds triggering solutions? | midi to cv converters? |help!
Hi Adam,
> from what i understand the devices use a +5volt input to trigger/sync. is
> there a" midi to a +5 volt pulse" converter that can read midi info from
my
> Alesis SR-16.
>
> Let me know if you know of any product/products that can tackle these
> duties. I'd love to have 6-8 triggers for expansion and flexibilty. I'm
also
> curious to know what the rest of you are using to trigger these older RDS
> devices with? any suggestions? pitfalls? triumphs?
DISCLAIMER: I don't have any of those items and have never tried trigger
conversions.
That said, I'd start with a MIDI-to-CV converter. If you're DIY inclined,
look at the PAIA kit:
http://www.paia.com/midi2cv.htm or for the non-DIYer, try this
from Kenton: http://www.kentonuk.com/
or from Philip Rees: http://www.philrees.co.uk/products/miditocv.htm
among others.
Depending on the MIDI message that you're decoding, you may need to map it
to another message which is understood by the MIDI-to-CV unit. The mapping
can be performed by a variety of products. Check out MIDI Solutions for
one:
www.midisolutions.com
Hope this helps.
Dennis Leas
-------------------
dennis@mail.worldserver.com