[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

FW: Speaking of hum and/or noise ... (was RE: FCB 1010)





-----Original Message-----
From: Patrick Bolan [mailto:pbolan@csiconstruction.com]
Sent: Tuesday, January 28, 2003 5:44 PM
To: m.lameyer@verizon.net
Subject: RE: Speaking of hum and/or noise ... (was RE: FCB 1010)


I have found that my DELL CPX laptop will cause considerable noise on
audio channels when it PLUGGED into the wall via an AC Adaptor.  If it
runs on batteries it's much much quieter.  

When I perform, I make sure it's just running on batteries.

That may help....?



-----Original Message-----
From: Michael LaMeyer [mailto:m.lameyer@verizon.net] 
Sent: Tuesday, January 28, 2003 2:28 PM
To: Loopers-Delight@loopers-delight.com
Subject: Speaking of hum and/or noise ... (was RE: FCB 1010)

I discovered recently, much to my chagrin, that while my motu midi
timepeice
was connected to my laptop via USB, WHILE the MTP was OFF (but devices
connected to the MTP via MIDI cables were ON and patched into my mixer),
resulted in my harddrive's activity being audible through my monitors!
:-(  And no, my laptop was not patched into any other equipment by any
other
means (audio or otherswise, except maybe the same wall outlet).  When I
removed the USB cable, the noise stopped immediately, and the noise
through
the monitors precisely coincided with physically audible hard drive
activity.

[Laptop]<--USB-->[MTP(OFF)]<--MIDI-->[audio
gear]--AUDIO-->[Mixer]--AUDIO-->[Monitors] = hard drive activity
noise!!!

Yucky.

Mike

> -----Original Message-----
> From: Evan Meyers [mailto:evanmeyers@yahoo.com]
> Sent: Tuesday, January 28, 2003 5:11 PM
> To: Loopers-Delight@loopers-delight.com
> Subject: Re: FCB 1010
>
>
> --- Clifford Novey <om@om-studios.com> wrote:
> > Note:
> >
> > Keep the FCB1010 away from wah pedals etc- it will
> > induce some serious hum.
> > Pick it up and move it around and listen to the
> > results. I discovered this
> > recently.
>
> could be from your midi cable.  i've heard that having
> sound wires newar midi wires creates frequency
> crossovers and hence unwanted noise.
>
> ~e