[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: SV: Muting tracks with Repeater via fcb 1010



Per excellent tips brother you are getting closer to
the answers!
Yes, i find setting the levels very tricky; for
example when i have all 4 tracks full and want to solo
on top of them my instrument volume is lower than the
looping tracks.So what i ve done is set one track with
a higher cc value so i when i input my  instrument
through it ill have a louder level. I set tracks 1,2,3
with a cc 0-64 and 4(the reserved solo track) with
with a cc0-127.
I still want to program the resampling option and
other commands but controlling volume controls wahs
and midi comands of the repeater, roland,echo pro and
EDP i am running out of pathces!
And no,i don´t want to get a second midi pedal...:-((







--- Per Boysen <per@boysen.se> wrote:
>  > > Any of you guys doing track muting via the fcb
> 1010
> > > live? Can this be done manually?
> > > Any tips?
> 
> > Från: Evan Meyers [mailto:evanmeyers@yahoo.com]
> > 
> > - if you are only controlling the repeater with
> the
> > fcb1010 then assign both expression pedals to the
> > repeater's channel and play around with different 
> > configurations of tracks and volumes.  you may
> want 2 tracks 
> > per footswitch or you may want to make one volume
> and another 
> > feedback level...depends on what your live music
> is like.  it 
> 
> In one FCB bank I have programmed four buttons to
> (1) select a Repeater
> track (record enable it) and (2) setting up one
> expression pedal to send
> volume data for that specific track. To me this is
> very intuitive; if
> I'm playing and suddenly realize that track 3 is too
> loud, then I only
> have to step on button 3 and change the volume with
> the pedal. I have
> calibrated the pedals to have them go from "mute" to
> full volume
> (expression pedal 2 is not availble for me as I use
> it for the EDP).
> 
> Whenever I press the record button on my FCB it will
> as well set up that
> same  expression pedal for "feedback". With the
> Repeater feedback is
> global and only active in recording mode for the
> track that you are
> recording to (which is not the case with the EDP).
> 
> Best wishes
> 
> Per Boysen
> ________________
> www.boysen.se
> www.looproom.com
> 


=====
www.labalou.com

__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com