SV: SV: TIP: Multitrack recording multiple output loopers as "first take"

["Per Boysen" <per@boysen.se>]

> 
> I am not sure whether we talk about the same thing.
> Say you have one EDP and build your loops in it and record its input 
> and its MIDI to the DAW.
> Now you have the joice to
> -  feed the EDP with the (edited) input signal and the (modified) 
> MIDI commands again to reproduce the performance, but you only get 
> one track out of the EDP.
> -  rebuild the loops in the DAW with the internal "repeat" command 
> and thus put each layer on a separate track. In Performer this is not 
> very handy because you can not overlap several layers on one track 
> nor fade the loops.

The tip was how to record a multi channel hardware looping rig into
different channels of a DAW. Like if you should be improvising with five
EDPs (and using a midi pedal for feedback, not the analog jack). Or as,
in my case, with an EDP and a Repeater that gives four analog outputs of
loops.

Best wishes

Per Boysen
__________________________________
www.boysen.se
www.looproom.com
www.fuzz.se
www.upsweden.com
Phone  +46 (0)8 341181
Mobile +46 (0)70 4416713