[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: Recording threashold and next loop autorecord
> I have an edp with loop4.
>
> I notice that when next loop is set to autorecord it ignores the =
> threshold setting, is there any way around this ?
> I wanted the threshold to be active as i often want one of the loops to
>=
> have 'faded in' chords and i cant move feet quick enough to get from
>the =
> efc-7 to the volume pedal !
>
> Does anyone have any workarounds for this problem ??
>
So Threshold only works when you go to Record from Reset (Matthias??),
that seems quite reasonable for keeping the flow of the music.
Won't there be a problem using Threshold anyway, because you'll
lose the start of the fade in and get some kind of an attack?
1) get yourself a chair
2) compensate for the extra delay by finishing the record early with
Overdub,
then if you need to set the loop start point do a 1 cycle Multiply
3) use a MIDI footcontroller, and set up 2 presets with your fave
settings, but one with Autorecord Off, and one On. you could then
program a Nextloop-with-autorec and a Nextloop-without-autorec
4) various other ways of doing this by MIDI controller
5) the lateral thinking workaround.
Use SwitchQuant=Cnf, AutoRecord=Off.
6) If you can operate the FCB-7 with your heel on the ground
it's possible to have the other foot on the swell without falling over.
Don't think I ever used Threshold before today.
(but often trip over too many pedals)
andy butler