Re: More EDP sync problems

[Geoff Smith <geoff.smith15@btopenworld.com>]

At last it works!!!
sorry for my stupidity.
Geoff
on 3/6/03 1:31 am, Geoff Smith at geoff.smith15@btopenworld.com wrote:

> yep 
> controlsource is not set to off
> thanku for trying to help
> Geoff
> 
> on 3/6/03 12:38 am, Doug Cox at dougcox@pdq.net wrote:
> 
>> Oops.  Two things:
>> 
>> 1) I see in your note that you made sure Sync=Out.  Sorry, didn't mean 
>to
>> imply that you hadn't.
>> 
>> 2) The next, onliest thing I can think of comes from reading the 
>manual...
>> "Sync=Out... MIDI clocks are sent out the MIDI Out port, **provided
>> ControlSource is not OFF**.
>> 
>> I didn't even know that.  Is your ControlSource set to OFF on the LoopIV
>> machine?
>> 
>> Now I'm really out of ideas.
>> 
>> Doug
>> ----- Original Message -----
>> From: "Geoff Smith" <geoff.smith15@btopenworld.com>
>> To: <Loopers-Delight@loopers-delight.com>
>> Sent: Monday, June 02, 2003 6:18 PM
>> Subject: Re: More EDP sync problems
>> 
>> 
>>> It gets weirder I have just beat synced the two echoplex's and the mpc
>> locks
>>> to the loopIII which is locked to the loopvi, why can't I just do it 
>from
>>> the loopvi ??????????
>>> Totally and utterly confused.
>>> geoff.
>>> 
>>> on 2/6/03 11:57 pm, Geoff Smith at geoff.smith15@btopenworld.com wrote:
>>> 
>>>> ARGH!
>>>> I have been trying to get my Akai MPC to sync to the midi clock of my
>> edp
>>>> loopIV
>>>> that i have a pre-recorded loop I like on.
>>>> However all is not going well.
>>>> as the Mpc is not being triggered by the EDP.
>>>> 
>>>> I have tested the mpc.
>>>> When using logic (transmit midi clock) the mpc starts when i press 
>play
>> and
>>>> reads the midi clock and then loops along in sync perfectly. Therefore
>> the
>>>> mpc is responding to midi sync fine.
>>>> Okay so this leaves the edp.
>>>> When i connect my EDP loop iv with sync set to out the mpc does
>> nothing!!
>>>> and if I press play on the mpc it simply plays the sequence at its
>> original
>>>> tempo and not the tempo of the edp. So how do you get a sequencer to
>> sync to
>>>> the edp when u have already recorded the loop before?
>>>> How to you send a start sequence command to the mpc like what happens
>> when i
>>>> press play on logic.
>>>> ARGHH!
>>>> bizarrely if i connect up my loopIII edp and create a loop the mpc 
>jumps
>>>> into play and syncs beautifully. So how do you sync to a loop u 
>recorded
>>>> earlier????
>>>> This is driving me up the twist.
>>>> 
>>>> At this rate i am gonna give up with the edps and use the psp42.
>>>> Damm Damm damm
>>>> I must be missing something obvious.
>>>> Can anyone help???
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>> 
>> 
>