Re: virtual buttons

["aurlite" <aurlite@prodigy.net>]

Cara,

Thank you for your suggestions. I finally had a moment of clarity on the
programming of this thing and all is well. My EDP just became a more 
amazing
machine!

Better looping thru MIDI !!!!

Jim
----- Original Message -----
From: "Goddess" <thefates@earthlink.net>
To: <Loopers-Delight@loopers-delight.com>
Sent: Saturday, June 07, 2003 3:52 PM
Subject: Re: virtual buttons


>   Jim, can you detail a bit of how you're working at it now?
>   -A couple things to check are that the midi channel is the same between
> the two, and that you're adding the correct midi offsets to the values
> listed in the manual.   In other words, if your midi offset is set to 36
in
> the Echoplex, then a note number of 1, would actually need  to be sent as
> note number 37 from the FCB.   Does this make sense?   -Hope this 
>helps...
>
> Smiles,
>
> Cara
>
> At 09:05 AM 6/7/03 -0500, you wrote:
> >   Hello fellow loopers,   I have an EDP with loop 4 software. I am
trying
> >to  figure out how to access the virtual buttons for operation via a
> >berringer  FCB1010 midi controller. So far I havn't had any luck getting
> >the two devices to  work together. The info in the manuals appears to be
> >easy to understand but I  still have not had any luck getting this to
> >operate. If anyone out there can  help me a suggestion or two that would
be
> >great. Thank You Jim aurlite@prodigy.net
>
>
> ---
>
>   "The only things I really think are important, are love, and eachother.
> -Then, anything is possible..."
>
> http://home.earthlink.net/~thefates
>
> Please visit BadFiction and The Guitar Cafe.
>
> http://groups.yahoo.com/group/badfiction
>
> http://groups.yahoo.com/group/the-guitar-cafe
>
>