[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: footswitchable series/parallel signal routing schemes
I don't see how you get a parallel configuration out of this.
A = serial, headrush and then RC20
B = bypass the RC20
A+B = serial (headrush then RC20), mixed with a straight signal
What am I missing?
Doug
----- Original Message -----
From: "Greg House" <ghunicycle@yahoo.com>
To: <Loopers-Delight@loopers-delight.com>
Sent: Thursday, July 10, 2003 6:04 PM
Subject: Re: footswitchable series/parallel signal routing schemes
> --- Tim Nelson <psychle62@yahoo.com> wrote:
> > I've been trying to come up with a simple way to route
> > a couple of loopers so that one footswitch will select
> > between running them in parallel, each with their own
> > output destination, and with running them in series,
> > one (a Headrush) cascaded into another (an RC-20), but
> > so far my experiments have been pretty frustrating.
>
> What about a simple A/B split? For example:
>
> instrument -> headrush -> A/B box: A -> RC20 -> passive mixer input 1
> A/B box: B -> passive mixer input 2
>
> passive mixer out -> other gear -> amp
>
> Greg
>
> __________________________________
> Do you Yahoo!?
> SBC Yahoo! DSL - Now only $29.95 per month!
> http://sbc.yahoo.com
>