[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: rds7.6
--- THusken@aol.com wrote:
> Hello everyone.
> I just snagged an RDS 7.6 from an ebay auction.
> Unfortunately the unit did not work when I received
> it. The unit is in beautiful cosmetic shape and all
> the led's are working, but the signal seems to 'pass
> through the unit' without adding so much as a little
> slapback. What gives?
> This problem seems so drastic that to my untrained
> brain, it seems like there might be a simple
> solution lurking somewhere.
> Any help you guys could give would be appreciated.
> Thanks, Todd Husken
Assuming the unit is not defective, you might try
the following:
1) make sure the effect is engaged by pressing the
effect button on the front panel
2) make sure you're connected to the mix and/or
phase outputs & that the mix, input, & output
knobs on front are turned up
3) make sure you're in delay mode & not sample
4) make sure that HOLD is not engaged
You might even want to open the unit & adjust the
trim-pot to see if this helps.
Instructions for this procedure & the users manual
are available on the LD website.
http://www.loopers-delight.com/tools/timemachine/timemachine.html
Good luck. I hope you didn't get a lemon. I bought
one off ebay several years ago & although it's beat
to hell, it still operates just fine.
John
=====
John Tidwell
__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com