[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: Looking for original TransTrem
Hey Cara, The following is copied directly from the SteinbergerWorld
website ( http://www.steinbergerworld.com/tt_tips.htm ). They use frames
and images of text so navigation can be a bit of a pain. I found that URL
on the technical info page at http://www.steinbergerworld.com/techinfo.htm
.
:)
The first version of the TransTrem (now known as a Type1) was designed to
use threaded ball ends in the bridge. This allowed for the fine tuning of
the transposing feature, as screwing the ball in or out moved the string
up
or down and thus varied the string length. But with the luxury of
hindsight, even Ned admits that it was not the most graceful solution.
The biggest complaint about this design came during string changes. Once
the trem was set up it worked great. But the fine tuning part (the ball
end) had to be removed and then reset again each time you changed a string.
After a few years Ned redesigned a version 2.0 trem (known as a Type2). A
major change was the addition of fine tunings jaws which separated the
transposing adjustment from the ball end itself. This allowed the use of
regular ball ends for the manufacturers, and meant the fine transposing
settings would remain set when the string was removed. Retuning after
string changes became much easier. This Type2 TT was introduced in the
late 80's, and all instruments manufactured up until production ended in
1998 featured this upgraded design.
For previous owners Type 1 owners frustrated with threaded ball end
strings
Steinberger offered an upgrade. You shipped your guitar (or just the
bridge) to the factory, and they replaced the jaws and either re-milled or
replaced the bridge top plate. Bridges that have been upgraded are said
to
have the "trem retro mod". For some this offers the best of both worlds:
the milled steel components of the Type1 trems add tone and sustain and
the
Type2 intonating jaws ease the hassle of string changes. Most trems were
upgraded, and it's estimated perhaps less than a hundred original
unmodified Type1 trems are still out there. Since the plant is closed
Gibson no longer offers the upgrade for older unmodified Type1 trems.
The pictures in this section should be a guide to what bridge you own. If
it's a Type2 or a Type1 "trem retro" then you've got the newer jaws and
the
standard sets of calibrated strings are what you order. If you still have
the original factory unmodified Type1 TT, then you must order threaded
double ball-end calibrated strings. Only LaBella makes these.
At 08:59 PM 03/09/23, Goddess wrote:
> Hi Sean, what's the dif between type 1 and 2? Thanks...
>
>Smiles,
>
>Cara