If you are just trying to use the sequencer as a clock source then just set the EDP to "sync in" and plug the midi cable from the OUT on the sequencer to the IN on the EDP. Midi clock does not have channel information. The EDP will display the length of the loop in seconds in seconds (2.0 for 120 bpm with default 8th/cycle = 8) If the QY is sending out MIDI clock this will work.
Try another midi cable or two just in case?
j
----------
From: "Chris Payne" <soundboot@o2.co.uk>
To: <Loopers-Delight@loopers-delight.com>
Subject: Re: Midi control of EDP
Date: Thu, Oct 16, 2003, 8:08 pm
The Yamaha QY70 is a pocket sequencer. Here is a page explaining more with a link to the manual:
http://www.geocities.com/Heartland/Pointe/6242/QY70/
Yes I have the EDP manual but I must be stupid or something because I can't seem to get what it says to do to work. Midi channels set correctly? Well the QY has different things on different channels I guess. What should the EDP be set to? I don't know what cc is but I'm not using notes (if you mean the keyboard as a midi controller for the functions). Hope that clears things up!
Thanks
Chris
----- Original Message -----
From: JAMES FOWLER, III <mailto:jimfowler@prodigy.net>
To: Loopers-Delight@loopers-delight.com <mailto:Loopers-Delight@loopers-delight.com>
Sent: Thursday, October 16, 2003 2:25 PM
Subject: Re: Midi control of EDP
i'll give it a shot.
what the hell is a qy70? where can i read the manual for it? do you have the edp manual? midi channels set correctly? are you using notes or cc?
-jim
|