[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: edp midi sync out
MY DEAR GENIOUS FRIEND >>>> THAT WAS IT !!!!!!!
it was set to receive note ON/OFF....
Don't know how it went there as it has been fully working for
months..... maybe my cats ???
1 wine & 1 Garda Lake's Extravirgin Olive oil cases are waiting for you
!!!!
Thanks a lot,
Luca
Claude Voit wrote:
>hey uca
>what is the tempo source in the fireworks ?
>be sure to set it to midi clock and _not_ to tap tempo as it seems (you
>say
>fw set to edp channel BUT midi clock is NOT channel relevant)
>so you probably better set it on another channel...;=)
>btw I dont have a fw but a GForce and I'm guessing
>
>have a nice day
>
>Claude
>
>I'll be back to you very soon concerning the rivolta gig....
>
>
>
>----- Original Message -----
>From: "Luca Formentini" <luca@unguitar.com>
>To: <Loopers-Delight@loopers-delight.com>
>Sent: Thursday, January 08, 2004 5:17 PM
>Subject: edp midi sync out
>
>
>
>
>>Hi everybody,
>>I see my post regarding the strange behaviour of a Fireworx slave to
>>Edp's midi sync passed with no interest, but I need to make some light
>>over the following:
>>Edp Sync=Out
>>Edp Midi out goes into Fireworx midi in
>>Fireworx set to respond midi tempo from Edp's midi channel.
>>Everything goes ok.
>>Now a loop is going, Fireworx is in sync.
>>Whenever I touch any button (multiply, reverse, overdub, mute...) on the
>>efc7, I see the Fireworx panel receives each time a new midi tempo order
>>(which is still the same originally received at the setting of the
>>loop), this thing is a bit annoying as the Fireworx has a sort of "stop
>>and go" with the effects which are following its midi sync.
>>I also suspect this is the cause of the freezing of the Fireworx, after
>>a while.
>>
>>Any help would be greatly appreciated.
>>Luca
>>
>>
>>
>>
>
>
>.
>
>
>