[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
RE: quick edp one...
Hmmmm ... I don't believe that you can break a long loop
into cycles (but I wouldn't be the guy to give you a
definitive answer there). If, in the long run, what you
want to do is a re-multiply on a loop that's only one
long cycle, you can do an unrounded multiply.
Say you have a loop going that is 1 cycle and 8 seconds.
If you hit multiply and then, when the counter gets to
2 seconds (for example) you hit record, you'll end up
with a 2 second loop consisting of the first 2 seconds
of your previous 8 second loop.
Did that make sense?
I believe this was actually a bug in the software that
turned out to be pretty useful so it was never fixed.
Glenn
> -----Original Message-----
> From: mark francombe [mailto:mark@mark-red.com]
> Sent: Friday, January 09, 2004 10:01 AM
> To: loopers-delight@loopers-delight.com
> Subject: quick edp one...
>
> Ok, multiply...
> Multiplies the current loop, er...I mean cycle... BUT what if you
> made a rather long cycle in the first place and you want to DIVIDE
> it into sections... if you know what I mean... I often make a short
> cycle, multiply it out to say 16X jam a bit overdub a bit, THEN
> re-multipy it shorter (theres probably a edp manual term for
this...but
> dunno) On Repeater its called Trim...
>
> BUT I really want to do that same thing to cycles that started out as
> pretty long in the first place, I AM head down in the manual A LOT,
> (so dont just go and say read the manual) but sometimes you just miss
> something right??? And this is one pretty fat manual.
>
> thanks in advance
>
> Mark