[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Midi Monitor
Hi Glenn
I am not sure what a midi monitor is(software or
hardware?)but i would be very interested in using this
as well.
Share your experiences!
thanx
L.a
--- Glenn Finerman <GFinerman@opticonUSA.com> wrote:
>
>
> Hi;
>
> Not possible for a midi echo as you describe..
> again, this problem is
> happening with only one midi device connected
> between the FCB1010 and the
> EDP.
>
> Of course, I can resolve the problem by just making
> the EDP the first device
> in the midi chain, but that would still leave me
> with the haunting question
> of "why is this happening"!!!
>
> I think Claude's suggestion of using a midi monitor
> is an excellent idea,
> I'll try and locate one for my PC. Would be a useful
> tool to have anyway.
>
> Glenn Fin
>
> The midi devices in my (live guitar rig) rack are;
>
> Mesa Triaxis
> TC Fireworx
> TC G-force
> Two EDP's
> Repeater
> Eventide Eclipse
>
>
>
> -----Original Message-----
> From: jlucas@neoprimitive.net
> [mailto:jlucas@neoprimitive.net]
> Sent: Friday, January 23, 2004 8:14 AM
> To: loopers-delight@loopers-delight.com
> Subject: Re: FCB1010 EDP MIDI thru problem?
>
>
> Make sure there's no MIDI echo happening. I'm not
> sure how this would
> happen with
> hardware, but I know that Cakewalk Sonar
> automatically defaults to MIDI
> Echo: Automatic,
> which means that whatever track you have highlighted
> (selected) receives the
> signal
> from any MIDI input and transmits it to the MIDI
> output defined by the
> track. Because
> of the way I have things set up this means that, if
> I accidentally leave the
> EDP
> track selected when I'm playing along with a
> sequence, when I press a button
> on
> the FCB1010 it sends the signal to the EDP and then
> immediately sends it
> again through
> Sonar, which causes the kinds of problems you're
> describing.
>
> What multi-FX box are you using? Including that
> would probably go a long
> way towards
> getting help on the list.
>
> -J
>
>
>
> -----Original Message-----
> From: Glenn Finerman <GFinerman@opticonUSA.com>
> Sent: Jan 23, 2004 10:57 AM
> To: Loopers-Delight@loopers-delight.com
> Subject: FCB1010 EDP MIDI thru problem?
>
> Hey folks...
>
> Just searched through the archives to see if I'm the
> only one who's
> experienced this odd problem... apparently I am
> (yikes!!)
>
> I'm using the Behringer FCB1010 to control a pair of
> EDP's using midi note
> on/off info.
> If I connect the FCB1010 midi out directly into the
> EDP's midi in,
> everything works fine...
> But if the midi out from the FCB1010 first goes into
> one of the midi devices
> (multi fx) in my rack, then I use the device's midi
> thru to feed the EDP,
> the EDP doesn't respond and will sometimes do
> strange things like go into
> parameter mode when I try and send a note message...
>
> I can't believe this is happening! And it's driving
> me crazy... help!!!
>
> Any ideas? Anyone? Please??
>
> Glenn Fin
>
=====
www.luis-angulo.com
__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free web site building tool. Try it!
http://webhosting.yahoo.com/ps/sb/