[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: Echoplex - Overdub fails
>Thanks so much! That helps greatly.
Regards,
Jon
>At 10:31 AM 3/4/2004, Jon Arterton wrote:
>>I'm a Newbie with a new Echoplex (which I love).
>>Suddenly it will no longer overdub.
>>The loop repeats and OVD goes red but nothing's being recorded
>>over. Then when I hit OVD again the light goes green and it starts
>>overdubbing. Seems backwards to me.
>
>you put it into delay mode. go to the Loop/Delay parameter and put
>it back on loop. Read that section in the manual so you understand
>all the different options.
>
>>A Second question: what's the easiest way?
>>Say I wanted four loops and wanted an original rhythmic pattern
>>from first loop to be repeated into the next three. I've tried with
>>LoopCopy but it continues on subsequent passes to copy onto
>>following loops. I really just want the first pass to be repeated.
>>Is passing though all four loops (perhaps with NextLoop & Multiply)
>>necessary before I start layering (not-for-copy) layers on top?
>
>I'm not sure I understand you, but with LoopCopy the loop you are
>currently in is the one copied to the nextloop. If you want to copy
>the same base into the other loops, you usually need to go back to
>the first one and then copy it again. You might have an easier time
>with that using SwitchQuantize, nextloop, and multiply, as you are
>considering. hope that helps.
>
>kim
>
>
>______________________________________________________________________
>Kim Flint | Looper's Delight
>kflint@loopers-delight.com | http://www.loopers-delight.com