[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

RE: Boomerang




Hello,

on the Rang you can have 2 separate loops A and B.
loop A can be used say for a verse, loop B can be used for a chorus;
the Rang has a foot switch named A/B which controls how the loops
are played/chained; this can be configured in 3 different ways.
you can download the Rang' documentation where this is all explained
here : http://www.boomerangmusic.com/

at any time there is only one loop playing, A or B;

the Main Out can be used to connect the Rang to an amp or a mixer,
the Aux Out can be used to connect the Rang to a recorder to backup your 
loops;

Whichever loop is playing (A or B), it goes at the same time to both 
outputs Main and Aux.

Hope that helps

Francois
    check samples of my music on http://1000.times.free.fr




-----Message d'origine-----
De:     Damon Grossman [SMTP:damongrossman@comcast.net]
Date:   samedi 10 avril 2004 22:43
À:      Loopers-Delight@loopers-delight.com
Objet:  Boomerang

regarding the rang you said:

the rang has 2 seperate tracs but they can not be played at the same time
and the rang is a mono looper but it has a main and an aux output that can
be sent to two different places.....

what is the point of sending it to two different places if the two tracks
can't be played at the same time.

damon
  -----Original Message-----
  From: Nemoguitt@aol.com [mailto:Nemoguitt@aol.com]
  Sent: Saturday, April 10, 2004 10:13 AM
  To: Loopers-Delight@loopers-delight.com
  Subject: Re: Percussionist and EDP seeker


  In a message dated 4/9/04 10:15:35 PM Eastern Daylight Time,
damongrossman@comcast.net writes:



    At the very least the Boomerang


  the rang has 2 seperate tracs but they can not be played at the same time
and the rang is a mono looper but it has a main and an aux output that can
be sent to two different places.....hope this helps.....michael
<< Fichier: ATT00003.htm>>

application/ms-tnef