[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

RE: EDP Input knob possessed



>OK, now what? Is it a pot replacement problem, or a board replacement? Or
>just resoldering?

just pot replacement.
if you unscrew the front and take off the knobs (just pushing) you 
probably can feel whether the input knobs axis is a little looser 
than the others.
if this is not the case, the problem may not be that it broke, but 
may be the pot anyway.
Might be interesting to verify with a ohm-meter: measure the total 
resistance of it, while moving it...

if you are not familiar with a soldering iron and multilayer PCB, and 
willing to do the fix yourself, we better stop this discussion, 
because a rep knows what I am saying here...

>
>Dave Eichenberger
>http://www.hazardfactor.com
>
>
>>
>>  yes, when the potentiometer brakes it does this, a little
>>  crack in the board with the resistance layer.
>>
>>  the input pot brakes because its the outmost and receives
>>  impacts from the left and front
>>
>>  :-(
>>
>>  >


-- 


          ---> http://Matthias.Grob.org