[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: Midi phantom power



At 07:17 AM 4/18/2004, Andreas Willers wrote:
>in the past I have run a Tech 21 midi mouse on phantom power from my EDP
>successfully, one little victory in the ever raging battle against
>wallwarts. It doesn't need much juice, and my amp tech could easily hook 
>up
>9 volt through one of the wires of the midi cable that is unused. My new
>Midi control device, a Kenton Spin Doctor, sais it needs 9V d.c. @ 250 mA.
>in the manual. Can the EDP supply this without getting into trouble? Can I
>simply try this out without coursing breakdowns? Matthias? Kim?

the Echoplex does not have 9v available, and trying to draw 250mA risks 
causing other problems. If a device is not designed to support something 
like this, I don't recommend trying.

kim


______________________________________________________________________
Kim Flint                     | Looper's Delight
kflint@loopers-delight.com    | http://www.loopers-delight.com