[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: problem edp- next- copy sound




>yes the edp creates pops when i copy loops, even when controlled from 
>front 
>panel. does this necessarilly mean that the problem is not in the 
>footswitch? what does reseating the chips entail (how to...)?

If the edp pops when your footswitch isnt even connected i think we can 
rule 
it out as the source of the problem (for now) .
If you choose to re-seat the chips, do so at your own risk and with a 
little 
caution it shouldnt be a problem.

unplug the  EDP fromthe wall socket. undo the top of the edp and slide it 
off, look for the memory chips, (the long thin ones that look like (and 
are) 
computer RAM. and the two chips with Loop.....and the version number on it 
(should be on a little sticker on the top of the chips. now before you 
touch 
anything ground yourself to remove any charge in your hands only use one 
hand as a time, now gentally push on the memory and the Loop chips to make 
them fit snug, having made sure they  arent disconnected or at an angle 
etc....put it all back togeather, turn on whilst holding down perameters 
to 
make sure you re-initiallise the hardware, give it a try and see what 
happens.

if this fails I would probably try running a sample from a cd plaer or 
something like that through the edp to check that the problem isnt with 
the 
grounding of your instrument.

if this fails then im at a loss  and you will have to ask someone more 
experienced then me to feild your  questions.


good luck

Phill

_________________________________________________________________
Express yourself with cool emoticons - download MSN Messenger today! 
http://www.msn.co.uk/messenger