[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: EDP Alesis Stumped



I tried to reproduce your problem, but it works fine for me. Can you 
please 
give a more exact set of steps you go through to make this happen? What 
buttons you press on each device, when you press them, are you controlling 
from the front panel or midi, etc. Maybe then we can figure out what's 
going on.
kim

At 03:45 PM 4/24/2004, Michael and Nikki wrote:
>SYNC=in
>QUANT=loop
>SWITCHQUANT=loop
>8THS/CYCLE=8
>MORE LOOPS=2
>SAMPLERSTYLE=run
>My Alesis drum machine is sending MIDI clock, and is set to a simple 4/4
>pattern.
>I record loop 1, no problem. I record loop 2, no problem. While playing 
>loop
>one, I press NEXTLOOP. The Echoplex thinks (000), then changes flawlessly
>into loop 2. While playing loop 2, I press NEXTLOOP. The Echoplex thinks
>(000), then instead of changing at the end of loop 2, it starts loop 2 
>over
>(even says so on the LED) and gets about one or two beats into the first
>measure before changing back to loop 1.




______________________________________________________________________
Kim Flint                     | Looper's Delight
kflint@loopers-delight.com    | http://www.loopers-delight.com