[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

RE: EDP multitap feature



Thanks Kim I guess I will have to startup my copy of MIDI Ox and try some 
of
that out I might be able to do this with Fuity Loops as it records MIDI 
too.
Naturally this isn't that high a priority for me but, useful to make it
known to those who keep requesting that feature. 

-----Original Message-----
From: Kim Flint [mailto:kflint@loopers-delight.com] 
Sent: Sunday, April 25, 2004 7:24 PM
To: Loopers-Delight@loopers-delight.com
Subject: RE: EDP multitap feature

At 03:59 PM 4/25/2004, Alan Kroeger wrote:
>There is a way (though not all that elegent without a lot of effort on 
>your part) for loop backup you could use a recorder to save your loops to.
>What it lacks is a marker for start record end record I suppose that 
>could be fixed or maybe there is some other way to get that. I suppose 
>with a little MIDI editing we could use the same mechanism to load a 
>stored loop but you would have to have some MIDI recording and editing 
>features so, this might be the job of a Laptop?

there are midi markers sent for all commands, and then as the loop plays
there are markers sent for the loop point, cycle point, and subdivision
points. You can record these along with the audio for easy editing later. 
You can then also load loops back to the echoplex fairly easily by sending
the same midi commands out with the audio from the recording device.

Dennis Leas used this technique for his Kyma based Looper Construction Kit,
which transfers loops between an Echoplex and Kyma in real time.

kim


______________________________________________________________________
Kim Flint                     | Looper's Delight
kflint@loopers-delight.com    | http://www.loopers-delight.com