[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: Running Two Echoplex Units in Stereo/Synced - Experiences?
> Also, as a side note, I've figured out how to loop all my instruments
> (acoustic guitar, sitar, and tablas) with the same looping unit. I
> basically run my looper unit through the aux. channel of my mixing
> board. More specifically, I run the Aux 1 send of my mixing board to
> the input of the looping unit, then the output of the looping unit to
> one of the mixing board channels. Then, with my stereo effects unit
> running though the other Aux 2 channel, I add that stereo effect to the
> looping unit signal. I can loop as many instruments as there are
> available channels on my board, plus adding a separate effect level on
> the looping unit. If I get another Echoplex, I'll run them in the Aux
> loop as well, inserting them first in the chain before returning to the
> board's input.
This is no dissimilar to how I run mine... I've got two auxes, in one I
have
two Echoplexes - so a mono in to each of them. I have them brother sync'd
so
I can pan multiple layers if I want to, even though I'm not looping in true
stereo yet.
In the other aux, I have my recently aquired second MPX-G2, which has my
Kaoss Pad in its effects loop. So I can run either loop, or the signal
coming from G2 #1 into the second G2, which can then have the Kaoss signal
either mixed with the other signal, or just Kaoss through extra G2
processing. It's a bit mind boggling at the moment, and I'm going to buy a
Mackie 1402 desk soon so that I can record all the outputs from these
millions of channels into separate ins on my computer, rather than the
stereo set up I have at the moment...
Steve
www.stevelawson.net (new improved flava!)