[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: SysEx Dump w/FCB 1010
Got a midi filter in PT activated by mistake?
All the best
Per Boysen
---
http://www.boysen.se
http://www.looproom.com
On 2004-05-29, at 06.37, John Metzler wrote:
> Hey guys and girls.
> I could use a little pro-style help with a SysEx dump of my
>Behringer
> foot controller. Here is what I am doing,....... maybe someone can
> point out where I'm going wrong.
>
> Dumping to a MIDI track in ProTools LE on my iBook.
> Using a MOTU FastLane MIDI interface connecting MIDI-In-A to MIDI-Out
> of the foot controller.
> The Audio MIDI Set Up in OSX is configured.
> The foot controller is sending out ch. 1. The MIDI track is set to
> record ch. 1.
> I power up the Behringer while holding down the DOWN switch and
> navigate to Configuration mode.
> I record enable the track and start recording.
> Then I push down switch #6 (SysEx Send) until after the light on that
> switch goes out.
> I go check ProTools, ..... still rolling but nothing has been recorded.
>
>
> THE END.
>
>
> Anyone got any ideas?
>
>