[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
RE: Preset EDP feedback
Ohhhh! I got it! So I just send the CC# and a certain value by regular
pedal...gotcha...easy enough..thanks!
Dave Eichenberger
http://www.hazardfactor.com
> What I meant was that you don't need to use sysex to
> accomplish this - you can use cc messages instead of sysex.
> Since you've already programmed a pedal to send continuous
> messages, you've got all the information you need to send
> discrete control messages.
>
>
> At 05:14 PM 2004.06.22, hazard factor wrote:
> >Right- it was more of an EDP question than a PMC one...I
> just have no
> >idea what the sysex commands to map to the pedals would be, som hex
> >string, I am guessing. I planned on adding some 'feedback
> presets' to a
> >bank if I am using the CC pedal for something else.
> >
> >Dave Eichenberger
> >http://www.hazardfactor.com
> >
> >>
> >> You don't have to use a pedal to send a cc - you can send
> a cc of any
> >> value by hardcoding it into one of the strings for a pmc
> preset (100%
> >> feedback would be a value of 127 for whatever controller feedback
> >> happens to be, 0% would be a value of 0).
> >>
> >>
>
>
>