[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: questions to EDP Loop IV Sysex specialists
>This are some questions for EDP Loop IV Sysex specialists (EDP manual p.
>11-3 ff)
gee, you made me look at that dusty code again...
>
>1. How do I calculate the memory size with these 3 bytes?
> When I send a INFO_REQUEST, I get:
> f0 00 01 30 0b 00 01 01 01 3f 6e 07 f7
> The bytes 3f 6e 07 are supposed to represent the memory size.
> (((3f * 100) + 6e) * 100)+ 07 = 44295)
> Shouldn't this be approx. 16 MB (16777216) ?
it puts out a number of blocks of 64 samples
and according to the rest of MIDI, they are 7 bit Hex values
>2. LOCAL_PARAM_REQUEST
> When I send a LOCAL_PARAM_REQUEST for the currently selected preset
> (encoded as 7F, see manual p.11-9) the EDP reboots for certain
> combinations of 'from' and 'length', e.g.:
> F0 00 01 30 0B 7F 01 12 01 02 7F F7
> 00 02
> 00 03
> 06 01
> Anyone else encountered this?
no, and I am not set up to test it...
as it looks, any preset number bigger than 16 is set to 0 which is
the actual, so you should be ok with 7F.
maybe you should not set from=0 since it does not exist as you note below?
maybe device ID should not be 7F? Seems we had some trouble with some
sampler so I usually tested with 0...
else it looks ok what you do, no idea...
so with other combinations of from and length it works?
>3. LOCAL_PARAM_REQUEST Index 0
> Manual p. 11-5 lists the indexes for local parameters starting with 1
> What is stored in parameter 0 then?
nothing probably, dont remember why we did not want to numerate from 0
>4. Claude Voit's http://www.loopers-delight.com/tools/echoplex/EDP_ADA.zip
> I tried this with the demo version of SoundDiver 3.0 but it doesn't
> seem to recognize the file. Anyone managed to use it? What version of
> SoundDiver?
I used it on the mac with V2.1 and it was fine... Claude?
--
---> http://Matthias.Grob.org