[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
RE: EDP and ground loop hum
My EDP+ hums when fed from the same power source as the rest of my rig (amp
in particular) unless I cut the grounding. I always carry two power cables
and usually first try the grounded, if it hums, go for the ungrounded.
Since
the rest of the rig is grounded I believe there's no danger of electric
shock...
B.
> -----Original Message-----
> From: Tom Rex [mailto:tomrex1@cox.net]
> Sent: Freitag, 24. September 2004 05:12
> To: Loopers-Delight@loopers-delight.com
> Subject: EDP and ground loop hum
>
>
>
> Is it common for the EDP to cause a hum in the audio system? I've tried
> moving it away from the speakers, but that didn't seem to help.
>
> The salesperson at the Guitar Center recommended a Morley Hum
> Eliminator. I
> routed the cables from the mixer, into the Morley, and then out to the
> speakers, and that helped a little, but there is still some hum there.
>
> I'm going to try redoing it, and putting the Morley in between the EDP
>and
> the mixer.
>
> Am I doing something wrong, wasting my time? I'm using the EDP in a
> electronic music environment, and none of the other pieces of
> hardware cause
> any discernible hum.
>
> Perplexed,
> Tom
>