[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: *SPAM* *SPAM* still making my footpedal- help
>Hi again all of you crazy loopers
>
>I posted a while ago asking for help in making m own EDP foot
>controlers, i know it was a busy time for many of you so i was not
>suprised when i didnt get a response.
>
>since then i have managed to source some actual DL-4 buttons which i
>th type I like the feel of the most and have made a metal case ro
>rhe size I think i will need for eight buttons and a volume control.
>
>however I need help on getting the resistors
>QUESTION1
>can anyone point me to a ebsite with th actual resistor values i
>need I cant find a SINGLE website that has for instance a 1% metal
>film resistor with a value of 14.3K ohms or indeed any of te other
>values,
they are not that critical. use 15k
metal film is not important. 1% is recommended and usually is metal film.
>I also asked a local elecrician who said he had never even heard of
>a 0% resistor.
neither I :-) where did you hear it?
there are 0Ohm resistors, a form of jumpers, for automatic cirquit
mounting, but you dont need those :-)
>
>QUESTION 3
>Instead of a footpedal I would like to add a knob similar to the one
>found on the fromt panel, to the side of my homemade pedal to
>control feedback, as I understand all i need is a potentiometer of
>20K or above and a plastic knob to cover the end of it that pokes
>out of the footpedal, I then attach this potentiometer to a jack a
>the other end and connect this to the edp with aregular cable, is
>this true??
yes
being that usually a 10k pot works better. If you are very unlucky,
it does not go to 127 though.
>
>Basically I have envisioned a pedal with the usual 7 buttons but
>this time in two rows with nice line 6 type metal buttons.
>
>I then thought I could add a eighth button that links to another
>jack that will go to the overdub jack of the edp and be momentary
>(is this possible, i.e. to have regular stomp ON stomp OFF overdub
>throught the regular Footpeadal jack and a momentary type non
>latching one going to the overdub jack.????)
no, sorry... the OverdubMute parameter works for both simultaneously.
through MIDI it would be possible
>Am I right in thinking that if this can be done, then this second
>overdub switch should be a 0 Ohms resistor and a non
>latching switch????
>
>I then also wanted to add a rotary pot as a dial on the side of the
>unit , this will be linked to another jack and cabled to the EDP
>feedback pedal IN.
consider a slider (fader)!
>I know there is a lot of info on the looper_delight website regards
>building, however when i go to my electronics store they ask me
>questions that i dont know.
>
>for instance, some of the resistor Ohms ratings are very specific,
>my local dealer only seems so stock "regular" near values , will
>these work.
they will
>also the guide says that i need 1% metal film, i can get this but
>there seems to be lots of differant ratings 0.25 , 5 etc anyonw know
>which i need?
well, better (smaller) than 1% tollerance is always good!
>also when buying the jacks for putting the cables in, is there any
>specifi type? there seem to be some with more arm type things then
>others....
the most simple is enough!
--
---> http://Matthias.Grob.org