[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: Mixing setups for looping
Hi Christian.
By far the coolest rackmount linemixer I've ever come across is the
Speck xtramix
http://www.speck.com/xmix_2.shtml
it's got like 76 inputs, 8busses and a switchable matrix of 8 sends, a
bit hard to explain. and it's only four units high.
Anyway, it's very high on my wishlist - you know, for when I become a
millionaire! it's 3,850$ if you buy direct... :(
Andreas
CHRISROVER@aol.com wrote:
> I've been experimenting with a switchable patch bay (ProCo) to reroute
>the output from Looper A to B and vice versa (without repatching) for
>some interesting performance options. Feedback loops pose a problem
>though since they also alter the basic sound (unwanted phase shifting).
>
> A mixer with several sends would seem to solve a lot of issues related
>to looping more than one source or looping with one or more devices.
>Routing and keeping your basic noiselevel to a minimum are definitively
>calling for some creative solutions. The only Rackmixer around (that I'm
>aware) of is an older Roland. However it is quite noisy and not in
>production anymore.
>
> Does anyone know of a small (possibly rackmount) mixer with at least 4
>sends or any other creative solution to using several sound sources and
>looping devices with multiple routing options (such as A to B and B to A
>without phaseshift or repatching) ?
>
> Best regards
>
> Christian Rover