[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re:Stuck EDP
> I can't seem to get the EDP "unstuck." I've tried the long "multiply"
> general reset and the long record button reset. I've turned off the EDP
> and turned it back on, but it keeps turning on in some strange mode that
> lets me record a new loop but it keeps recording after I hit the record
> button again to stop.
Quick answer. Long Undo in Reset.
>IIt seems to be remembering something that I would rather have it forget.
Long Answer. Yes, it seems you inadvertently programmed a BPM setting.
When in reset, you can hit "Undo", and use the Feedback knob to enter a
BPM
setting.
Then the EDP calculates loop length based on 8th/Cycle.
This stays in memory, and can be saved to a Preset.
It can then be removed by entering Reset and pressing a Long Undo.
If you need to reset to factory settings (which you don't this time)
simply
hold down the parameter button when you switch the machine on.
andy butler