[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Changing EDP Parameters via MIDI
At 01:25 14/07/05, you wrote:
>Can anyone point me to a primer on if, and how
>to change parameters on the EDP via MIDI?
I think it can be done by sysex,
...but you won't be doing that with the FCB1010 ;-(
Easier to program some presets, which the FCB will be able to conjure up
with
prog change messages.
> Rick has me experimenting with Insert=SUB with
> quantize set at 8th notes, which generates some
> cool effects, but normally when I play I want
> quantize set to OFF. Can I send a MIDI signal
> to the EDP to change quantize to 8th notes,
> perform the Insert magic, and then turn the
> quantize back to OFF? I suppose this will take
> three button pushes on my FCB and consequently
> take up three more buttons on the unit….
>I suppose I could create a preset on the EDPs
>with these Quantize settings, and select that
>with a program change, but I was hoping to avoid the work of setting that
>up.
you wanna be no. 1 experimenter?
try this,
program your FCB to also send prog change on the button presses.
so the button for "Insert=SUB" also send the prog change for the preset
with
Quant=8th
..and all the others have prog change for the preset with Quant=OFF
Now, if the FCB1010 sends prog change before noteOn
(and I'm pretty sure it does) you're in with a chance that you get exactly
what you want without any more buttons used up.
...no guarantees though, I don't know if the EDP will
respond as hoped.
andy butler
>Kris