[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
FCB1010/EDP Question
Any ideas on why the display on the FCB reads F1 after pedal
calibration, even though I have the midi out
connected to the midi in of my edp? I am also having no luck getting
the FCB to "see" my
Echoplex. Im certian the cable is working fine? I have used a FCB
before and it worked fine.
The pedal was made in 06/04 so the firmware should be fine. The
Channels are all set to
one, as is the edp. Any Ideas?