RE: EDP Footpedal vs. FCB1010 ? ?

["Dean, Hal " <HDEAN@wcupa.edu>]

I'm pretty sure I did... seems obvious. But I'll check of course, thanks
for the suggestion.

Hal Dean


-----Original Message-----
From: Jeff Larson [mailto:Jeffrey.Larson@Sun.COM] 
Sent: Wednesday, September 14, 2005 12:34 PM
To: Loopers-Delight@loopers-delight.com
Subject: Re: EDP Footpedal vs. FCB1010 ? ?


Dean, Hal wrote:
> I've had enough experience programming controllers to be undaunted by
> the arcane language of the manual. I was unable to use the editing 
> software I got from the Yahoo FCB-1010 support group (frankly I don't 
> recall at the moment why it did not work, but no matter for now), but 
> was able to decipher the manual and get the switches working.  The 
> problem is the pedals - they don't work at all.

Did you program the pedals as described in section 2.4.5?  From what I
remember calibration isn't enough, you have to explicitly assign the
desired CC numbers.  These assignments are not global, you have to
duplicate them in *every* preset.

Jeff