[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: EDP FCB
I've got my 2+ banks of FCB-Repeater commands written down, taped to the
rack side. Formerly I relied on my memory (not good), but after a
period of little looping ("Little Latin Lupe Lu?"), I was not real sure
what I'd programmed. Then someone posted here what they'd found on the
archives as a sample of a FCB-Repeater setup. It turned out to be mine,
what I'd posted way earlier! Won't lose it again...
David
jondrums wrote:
> I know this sounds obvious but I haven't seen other people doing it.
> I put some tape in a strip above each of the control pedals on the
> FCB1010 and wrote in what function they do in each of the three banks
> I have programmed. Its kind of too small to easily read standing up,
> but you could try color coding, symbols, whatever works. I pretty
> much have bank1 memorized, and use 2 and 3 for slightly more
> specialized functions so its nice to have the cheat sheet there.
>
> I also copied and pasted stuff from the pdf manual into a spreadsheet
> and organized everything there for all my midi devices so I don't have
> to go flipping through manuals to figure out which PG, CC, of NOTE
> controls what, ect.
>
> Also, write down what midi channel numbers each device you have is
> supposed to be set to and stick this to your FCB - you will thank me
> sometime in the future when things aren't working right becuase you
> added a new device and its interfering with midi data on a certain
> channel.
>
> Jon
>
>
>