[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Fwd: Programming the Behringer FCB1010 for Echoplex use, a quick guide
I thought you could set the min and max values for the CC pedals for
each patch--I'll check that and report back. I always wanted an
analog resistor box for feedback with like four settings--100%, 80%,
50% and 25% since those seemed to be the ones I used.
TravisH
On 10/30/05, .David.Auker. <DaVAuk@hevanet.com> wrote:
>
>
> Kris Hartung wrote:
>
> >Now what would be ideal are steps to make exp. pedals A and B control
> >feedback and volume...I did already but forgot how I did it!
> >
> Is there any way for FCB Presets to set Feedback at some precise
> "favorite" levels as the foot rocking on the Expression Pedal is a bit
> of an inexact move (for me, anyway!). I'm currently doing it with a
> regular expression pedal plugged into the EDP...works fairly well, but
> it gets funky to inadvertently dip down into some low numbers, then
> change, as it makes a "spike."
>
> .David.
>
>