[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
RE: Behringer FCB1010
I think you should look again, Travis - I successfully uploaded a bank from
the FCB to JSynthLib, edited it, and sent it back. Unfortunately, the FCB
itself didn't seem to receive it properly, so now I need to test a more
straitforward sysx dump/receive with a sequencer to see whose bug it is
(JSynthLib, FCB, or the most likely culprit, me, somehow).
Best wishes,
Warren Sirota
> -----Original Message-----
> From: Travis Hartnett [mailto:travishartnett@gmail.com]
> Sent: Thursday, November 24, 2005 4:13 AM
> To: Loopers-Delight@loopers-delight.com
> Subject: Re: Behringer FCB1010
>
>
> I see the JSynthLib page lists the Behringer FCB1010 as being
> supported, but I don't see it listed in the available synths
> when you're actually running the program.
>
> TravisH
>
> On 11/19/05, Warren Sirota <wsirota@wsdesigns.com> wrote:
> > Sounds like a cool thing.
> >
> > BTW, although I haven't tried it yet, the open source patch
> > editor/librarian JSynthLib has a module for the FCB (eprom
> update or
> > no, as I understand it).
> >
> > Best wishes,
> > Warren Sirota
> >
> >
> > > -----Original Message-----
> > > From: hazard factor [mailto:artists@hazardfactor.com]
> > > Sent: Saturday, November 19, 2005 3:08 AM
> > > To: Loopers-Delight@loopers-delight.com
> > > Subject: RE: Behringer FCB1010
> > >
> > >
> > > Actually, that is the only way to do it...you have to
> order or burn
> > > the new eprom. I am using Unofficial version 1.0.2b. It
> adds quite a
> > > bit control, since Behringer didn't use the memory to its
> fullest.
> > > There is even a computer
> > > (PC/Mac/Linux) editor for the new version too.
> > >
> > > Dave Eichenberger-
> > > http://www.hazardfactor.com
> > >
> > >
> > > > hey Dave sounds cool dont you have to change the Eprom?
> which one
> > > > do you have?
> > > >
> > > > --- hazard factor <artists@hazardfactor.com> wrote:
> > >
> > > >
> > > >
> > >
> > >
> >
> >
>